Features
11.6inch IPS screen,1920×1080 hardware resolution
Toughened glass capacitive touch panel, 6H hardness
Supports popular mini PCs such as Raspberry Pi, Jetson Nano, BB Black, as well as general desktop computers
When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
When work as a computer monitor, supports Windows 10/8.1/8/7, ten-point touch, and driver free
Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch
Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc.
3.5mm audio jack supports HDMI audio output
Embedded ferrite Hi-Fi speaker
Also supports VGA input (specific cable is required and should be purchased separately)
75x75mm spacing mounting holes (M4 screw hole) for general wall mount
Comes with 75° tilt angle stand
Development Resources
Wiki: www.waveshare.com/wiki/11.6inch_HDMI_LCD_(H)_(with_case)
FAQ
Why the LCD doesn’t work with my Raspbian?
To use the LCD with the Raspberry Pi official image, the driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn’t work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise, the Pi may fail to start up because the PC’s USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.